Wiring Looms for GX Winches to 2000W

Only %1 left in stock

Lone Star Marine have provided premade wiring loom cables cut to length, complete with tinned lugs and epoxy filled heat shrink. All anchor winches must be wired in to operate and these premade cables are the way to go!

LSM Australia Looms are made using Premium Oxygen Free Australian Made Tinned Copper Cable, Alco H/D tinned lugs, and dual wall epoxy filled heat shrink. All Looms can be custom made for your boat or are also available in generic configurations.

All LSM wiring looms are rated for winches to 2500W.

Loom Measurements (As per diagram)

  • L1. Battery to Switch Panel: Switch Panel mounting area of 100 x 100mm. This should be located to the left or above the steering position.
  • L2. Battery to Solenoid: Solenoid can be mounted in a dry place anywhere between the Switch Panel and winch motor, but must be installed upright. Size is appr. 110x60x110. There will be four cables attached to the top. Under the dash or near winch motor is ideal.
  • L3. Switch Panel to Solenoid
  • L4. Solenoid to Winch Motor: Supplied installation instructions feature Placement Diagram & Switch Panel Template for easy installation.

Product Range-Generic Looms for Half Cab and Runabout Style Boats 

  • 1000XS Loom, boats to 5.5m -- L1-4.5m, L2-4.5m, L3-1m, L4-2.5m
  • 1000S Loom, boats to 6.5m -- L1-5.8m, L2-5.8m , L3-1m, L4-3.2m
  • 1000L Loom, boats to 7.5m -- L1-6.5m, L2-6.5m, L3-1m, L4-3.8m
Write Your Own Review
You're reviewing:Wiring Looms for GX Winches to 2000W

Related products